Parts

This replacement seatpost for the Shiv Disc ensures the perfect fit with two different setback options— 0mm and 25mm. - Aerodynamic FACT carbon construction that's compatible with the Shiv Disc. - Profile that integrates with the shape of the rear Hydration Fuelcell for maximum aerodynamic performance. - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Setback: 0/+25mm

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

- Stock for 07-08 Record and Chorus 10-speed compact and standard cranksets - Ultra-Drive ESP alloy chainrings with anti-friction treatment and ramps/pins - *Campagnolo compact rings are Ultra-Torque specific BCD - Color: Grey

- Replacement urban threadless forks - Accepts up to 40mm tire width - Chromoly construction - 1-1/8" steer tube - Size: 700C - Steerer Type: Threadless - Steerer Length: 300mm - Material: Chromoly - Offset: 45mm - Axle-to-Crown: 405mm - Race Diameter: 30mm - Axle: QR

Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

Shimano's Tiagra Rapidfire Plus Shift Lever (2x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: SL-4700 - Series: Tiagra - Shift Lever Type: Rapidfire Plus - Cassette Compatibility: 10-speed - Front Shifting: 2-speed - Shift Cable Casing: OT-SP41

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems. FEATURES: - 22.2 Bar Bore - 3K Weave Carbon Fiber - Gripper Clamping Area - Impact-Resistant Clear Coat - Water Decals SPECIFICATIONS: - 3 Inch 4.5 Inch 6 Inch - Clamp (Ø) 22.2mm - Material UD Carbon Fiber - Sweep 6° back, 2° up 6° back, 2° up 7° back, 2° up - Weight 166 grams / 5.9 ounces 204 grams / 7.2 ounces 288 grams / 10.2 ounces - Width 21.5 inches 23.6 inches 26 inches Please note, the maximum recommended rider weight for these bars is 100 pounds.

- Super-light chain for use with 10-speed Campagnolo/Shimano/SRAM with Diamond Like Coating for extra durability - Use: Mountain/Road - Size: 1/2 x 11/128-inch - Width: 5.9mm - Weight: 253g - 116 links

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Pair Shimano's 1x11 XTR chainring with an XTR rear derailleur and experience a simple, light drivetrain with exceptional chain management. A range of chainring sizes lets you customize your drivetrain for any terrain.

- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

• Chromoly construction • V-brake mounts • I.S. disc mount • Fits bikes with 20-inch wheels • Steerer length: 250mm

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8

- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

- 3D Forged and CNC machined from AL7050/T73 - 3D Forged AL6061/T6 faceplate - 4-bolt cold-forged alloy faceplate - Cr-Mo hardware - 40mm fork clamp stack height - 162g (80mm)

- Extruded and CNC-machined AL6061-T6 pedal body - 2 sealed bearings and 1 DU sleeve bushing - 9/16" CNC chromoly spindle - 109mm x 110mm x 15mm concave platform for large feet - M4-10mm outer and M4-8mm inner SS replaceable pins enhance concavity - Size: 9/16" - Material: AL6061 - Style: Platform Pedals

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.7mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 129g

T47 threaded BB cups for T47 frames and 29mm diameter spindle SRAM DUB compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 86mm - 121mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 29mm - Over Bearing Width: 90mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields. - Tool Pattern: 48.5mm x 16-notch - Weight: 97g Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - T47 shell with a width of 86.5mm and SRAM DUB Road Crank - T47 shell with a width of 89.5mm, 92mm, and SRAM DUB MTB Crank - T47 shell with a width of 121mm and SRAM DUB Fatbike Crank

T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 30mm - Over Bearing Width: 68mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 97g

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM and Truvativ GXP cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer - Drive Side Bearing: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.2mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 162g

T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specification: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 24.00mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 150g