Bottom Brackets

BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter cranks, such as those from Shimano, FSA, and others into an ITA shell. CeramicSpeed bearings are pressed into threaded cups, then those cups are threaded into the frame. You choose whether you want yours equipped with Standard or Coated Bearings. Super-round, super-smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. ITA BBs, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that's done, the system is excellent. 24mm cranks work better when mated to our bearings. To make your bike as efficient as possible, you must reduce mechanical drag. Bottom brackets have a measurable effect on speed. CeramicSpeed balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. That means our Standard Bearing BBs have 75% less drag compared to typical bottom brackets. And, the bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you're riding in wet conditions, more durable LongLife Grease can be put in. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of All Round grease - Sticker sheet

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor, to fit in the tight space of this 34mm spindle. Choose between two bearings types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our CeramicSpeed Balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Note that the threaded extensions of this BB's cups that thread into the frame are thin, as they need to fit a 30mm spindle inside the cups. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet - Spacertube

Rock The BB Precise fit, smooth-rolling operation, long-living performance–what more can you ask for from a bottom bracket? Install a 30mm CINCH crankset friendly PF30 and get riding...and keep riding. Rolling deep The PF30 bottom bracket uses reliable 6806 retainer bearings packed with waterproof grease, along with wiper seals to keep the gunk out. Close Enough Won't Cut It We fired up the ol' CNC machine to make sure the anodized 30mm alloy cups of this bottom bracket provide an exact, perfectly quiet fit for your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and the appropriate spacers to ensure a perfect fit.

- Steel body - Chromoly spindle - Sealed bearings - Repair BB designed to work in frames that have stripped BB threads - Shell: 68mm - Spindle Type: Square Taper JIS - Weight: 360-370 grams

Maximize your pedaling efficiency with Origin-8's Torq Lite Outboard Ceramic Bottom Bracket. It features CNC'd 6061-aluminum cups with super-smooth and durable double-sealed ceramic bearings and stainless-steel races. It is made for 68mm, 70mm or 73mm bottom brackets and can be used in road or mountain bikes. It comes with spacers and has an anodized and laser-etched finish, too.

ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts

- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BB30 frames - Shell: 68/73mm x 42mm - Interface: BB30 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g

- Spindle Interface Type: 386 EVO - BB Shell Width: 68mm - Bottom Bracket Shell I.D.: 46mm - BB/Frame Interface: T47 - Weight: 95g

These bottom brackets are equipped with hand-built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99mm cranks. Coated bearings utilize the highest-quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron-thick metallic coating that makes the races corrosion-resistant, harder, and smoother, increasing service life and reducing friction. - This product has a unique design specifically for SRAM DUB 28.99mm cranks - Native fit frame interface and no plastic adapters or excess spacers - This design features a custom integrated dust cover for maximum durability In the box: - 2 CeramicSpeed Bearings - 2 dust covers - Plast sheet - 1 x 3mm spacer - 2 x 1mm spacers - 10ml syringe of CeramicSpeed Long Life Grease - Sticker sheet

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

Origin-8's BB30 Adapters allow you to convert your bicycle so that you can install a SRAM GXP or Shimano Hollowtech II BB30 crankset with a 24mm-diameter spindle. These Adapters include machined-aluminum cups, super-smooth and durable sealed bearings, shims and C clips.

Thread together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.8mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 145g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 22/24mm diameter spindle cranks: - BB386EVO - BB392EVO

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles

- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 30mm spindle cranks in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm Asymmetrical - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 158g

T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g

Origin-8's ISIS Bottom Bracket is everything you need to get your wheels rolling. It features a steel body and hollow-chromoly spindle that adds stiffness and cuts down on weight. The sealed bearings are super smooth and durable, and this fine BB is available in 3 sizes with a 68mm shell.

Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB30 - BB Shell Width: 73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 42mm

Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down. This GXP100 bottom bracket matches SRAM's Fat Bike cranks.

- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086) - Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II - BB Shell Width (mm): 79 – 84.5 - Bottom Bracket Shell I.D.: 46 - BB/Frame Interface: BBright Direct Fit

6061 CNC machined Alloy cups w/ Precision sealed bearings. - Bearings: 19mm mid sealed (x2) (with american cups) - Spindle: 19mm, 8 spline (included in kit) - Spacers: 6061 Alloy cones with 15/16"/19mm hat washer and 4x spacers included NOTE: These sealed American BB & American BB sealed upgrade kit (with 8-spline spindle) are designed to replace the 8 spline spindle and bearings of an unsealed American BB with a sealed version. Fits most complete bikes that come with unsealed American 19mm BB. 19mm Model does not come with a spindle.

- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Replaces all standard BB86/92 press-fit bottom brackets - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups

Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g

Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit. - Designed specifically for gravel riding and racing to protect against water, mud & grit