Accessories

Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

The Roll Cage is a durable, stamped aluminum water bottle cage that's compatible with SWAT accessories for tool and storage integration. It also features a unique left-, right-, and center-mounting design that allows you to easily manage bottles when space on the frame is limited. - SWAT technology design allows for storage and tool integration. - Three mounting positions allow easy in-and-out bottle accessibility from the left, right, or center position. - Cage can be rotated to alternate positions after installation. - Accepts EMT Cage Mount Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 50g

Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame

Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible

- Used to install fork dust seals

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Your beverage will stay cool as cucumber with our Coldie cup holder. Super insulated to keep your beverage frosty for the ride ahead!

- Combines a powerful cleaning formula of solvents proven to be tough yet safe with strong 8" x 12" industrial strength, super absorbent, dual-textured towel - Features a textured side for scrubbing and a smooth side for gentler applications - Scrub the bicycle with the textured side then wipe clean with the smooth side - Not for use on untreated carbon frames

PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.